Without PUP Catalytic Converter

1. Install the new exhaust manifold gasket (1) to the cylinder head.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the exhaust manifold (2). Secure the exhaust manifold with the five bolts and the three nuts.
Tighten the exhaust manifold bolts and nuts to 23 Nm (17 ft. lbs.).





3. Install the exhaust manifold heat shield (6) to the exhaust manifold. Secure the exhaust manifold heat shield with the four bolts.
Tighten the heat shield bolts to 10 Nm (89 inch lbs.).