Air Cleaner Housing: Service and Repair

Air Cleaner Assembly Replacement


REMOVAL PROCEDURE




1. Remove the air inlet duct (1) from the air cleaner cover.
2. Release the four air cleaner cover retaining clips (2).
3. Disconnect the EVAP system vent hose from the air cleaner cover.
4. Remove the air cleaner cover.




5. Remove the three air cleaner lower assembly bolts (1).
6. Remove the air cleaner lower assembly (2) from the vehicle.

INSTALLATION PROCEDURE




1. Install the air cleaner lower assembly (2) to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Secure the air cleaner lower assembly with the three bolts (1).

Tighten
Tighten the three bolts to 10 N.m (89 lb in).

3. Install the air cleaner cover.




4. Secure the air cleaner cover with the four retaining clips (2).
5. Connect the EVAP system vent hose to the air cleaner cover.
6. Connect the air inlet duct (1) to the air cleaner assembly.