Hourmeter

The instrument cluster has the capability to display accumulated engine run time hours using the VF display when the cluster is in the LOCK or the ACC position. The hours will accumulate only with the ignition switch in the RUN position and the engine running. The cluster determines and stores the accumulated engine run time hours in a non-volatile format such that if the battery was disconnected or removed from the vehicle the accumulated hours would not change. The cluster will display the accumulated hours when the ignition switch is in the OFF position and the trip reset switch is pushed in and held for more than 4 seconds. The accumulated hours will be displayed for 30 seconds and then turn OFF. The hourmeter will roll over to 0.0 when 10,000 hours are accumulated, and begin to accumulate hours again.