Instrument Panel Cluster (IPC) - Bezel Replacement

REMOVAL PROCEDURE
1. Apply the parking brake to prevent the vehicle from moving.
2. Move the shift lever all the way down (if the transmission is automatic).
3. Tilt the steering wheel to the full down position.
4. Pull gently rearward on the retaining clips holding the bezel to the instrument panel (IP) assembly.
5. Remove the bezel.

INSTALLATION PROCEDURE
1. Position the bezel to the IP assembly.
2. Align the guide pins and the retainers with the holes in the IP assembly.
3. Apply pressure to the bezel in the area of the retainer clips in order to engage the clips to the IP assembly.
4. Tilt the steering wheel to the normal drive position.
5. Move the shift lever to the park position (if the transmission is automatic).
6. Disengage the parking brake.