Luxury

REMOVAL PROCEDURE
1. Remove the park/[1][2]turn signal lamp assembly (5).
2. Remove the park/turn signal bulbs/ connectors (6) from the lamp assembly.

INSTALLATION PROCEDURE
1. Install the park/turn signal bulbs/connectors (6) to the lamp assembly.
2. Install the park/[1][2]turn signal lamp assembly by sliding the tabs (7) into the grille slots.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the screws (4).

Tighten
Tighten the screws to 1.5 N.m (13 lb in).