Front

Removal Procedure





1. Raise the vehicle. Support the vehicle with suitable safety stands. Refer to Vehicle Lifting.
2. Remove the wheel and tire assembly. Refer to Tire and Wheel Removal and Installation (Single Front or Rear Wheels) in Wheels, Tires and Alignment.

Important: Remove the parts from the right front and the left front of the vehicle. Keep the parts separated.

3. Remove the stabilizer link nuts.
4. Remove the stabilizer link bolts.
5. Remove the stabilizer link spacer assemblies.
6. Remove the stabilizer shaft clamp bolts.
7. Remove the stabilizer shaft clamp.
8. Remove the stabilizer shaft.
9. Remove the stabilizer shaft insulators.
10. Inspect all of the parts for wear and damage.

Installation Procedure





1. Install the insulators to the stabilizer shaft. Face the slit in the insulator forward.
2. Install the stabilizer shaft to the frame and to the lower control arm.
3. Install the stabilizer shaft clamp to the insulator.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the stabilizer shaft clamp bolts to the frame.
- Tighten the bolts to 33 Nm (24 ft. lbs.).
5. Install the stabilizer link spacer assemblies.
6. Install the stabilizer link bolts.
7. Install the stabilizer link nuts.
- Tighten the nuts to 18 Nm (13 ft. lbs.).
8. Install the wheel and tire assembly. Refer to Tire and Wheel Removal and Installation (Single Front or Rear Wheels) in Wheels, Tires and Alignment. Lower the vehicle.