Inside Air Temperature Sensor Replacement (Interior)
REMOVAL PROCEDURECAUTION: Refer to SIR Handling Caution in Service Precautions.
1. Disable the air bag.
2. Remove the left sunshade.
3. Remove the body lock pillar.
4. Remove the left windshield garnish.
5. Remove the sunroof molding trim, if equipped.
6. Remove the left rear assist handle.
7. Remove the upper console.
8. Using a flat-bladed tool, gently pry out the air temperature sensor.
9. Disconnect the electrical connector from the air temperature sensor.
INSTALLATION PROCEDURE
1. Connect the electrical connector from the air temperature sensor.
2. Install the air temperature sensor.
3. Install the upper console.
4. Install the left rear assist handle.
5. Install the sunroof molding trim, it equipped.
6. Install the left windshield garnish.
7. Install the body lock pillar.
8. Install the left sunshade.
9. Enable the air bag.