Folding Top Material Replacement (Rear)
Folding Top Material Replacement (Rear)
Removal Procedure
1. Remove the folding top rear window. Refer to Folding Top Rear Window Replacement.
2. Remove the folding top quarter windows. Refer to Folding Top Quarter Window Replacement.
3. Unsnap (1) the front folding top material from the roof support (3), near the dome lamp.
4. Unsnap the rear folding top material (2) from the roof support (3), near the dome lamp.
5. Push down on the folding top #3 bow release button (1) on each side and tilt the base (2) of the #3 bow (3) forward. This will remove the tension from the rear folding top material.
6. Unsnap the rear folding top material from the folding top #3 bow (3).
7. Detach the rear bottom corners of the rear folding top material.
8. Detach the front of the rear folding top material (2) by unhooking from the folding top side body joint cover (1).
9. Remove the rear folding top material (2) from the vehicle.
Installation Procedure
1. Install the rear folding top material (2) to the vehicle. Secure the material by attaching the front of the material to the folding top side body joint cover (1).
2. Install the rear folding top material (2) over the folding top #3 bow.
3. Fasten the rear bottom corners of the rear folding top material to the body.
4. Snap the rear folding top material to the folding top #3 bow.
5. Position the folding top #3 bow base (2) rearward and return the bow (3) to the upright position in order to apply tension to the folding top material.
6. Snap (1) the rear folding top material (2) to the roof support (3), near the dome lamp.
7. Snap (1) the front folding top material to the roof support (3), near the dome lamp.
8. Install the folding top quarter windows. Refer to Folding Top Quarter Window Replacement.
9. Install the folding top rear window. Refer to Folding Top Rear Window Replacement.