Folding Top Material Replacement (Front)

Folding Top Material Replacement (Front)

Removal Procedure





1. Lower the radio antenna.
2. Swing the sunshades down in order to gain access to the folding top latches (1).
3. Push in the folding top latch buttons (2).
4. Pull the latch (1) back.
5. Unhook the latch (1) from the front top bow.
6. Lift the front top bow.




7. Unsnap (1) the front folding top material (3) from the folding top #1 bow (4).




8. Unsnap the snap (3) which secures each tension strap (1).
9. Pull the straps (1) out of the plastic loops (2).




10. Unsnap (1) the front folding top material from the roof support (3), near the dome lamp.




11. Fold the front folding top material (1) back in order to gain access to the screws which secure the material to the front folding top weatherstrip retainer (3).




12. Remove the screw (2) from each side which secures the front folding top material (1) to the front folding top weatherstrip retainer (3).
13. Remove the front folding top material (1) from the vehicle.



Installation Procedure





1. Install the front folding top material to the vehicle.
2. Install the screw (2) to each side which secures the front folding top material (1) to the front folding top weatherstrip retainer (3).




3. Position the front folding top material in order to snap (1) the material to the roof support (3), near the dome lamp.




4. Snap (1) the front folding top material (3) to the folding top #1 bow (4).




5. Pull the tension straps (1) through the plastic loops (2). Secure each strap by snapping the snap (3).




6. Hook the folding top #1 bow to the folding top latches (1).
7. Push the latches (1) down until the latches click into place.
8. Return the sunshades back to their original position.
9. Raise the radio antenna.