Operation CHARM: Car repair manuals for everyone.

Air Cleaner Housing: Service and Repair

REMOVAL PROCEDURE




1. Remove the air inlet duct (1) from the air cleaner cover.
2. Release the 4 retaining clips (2) on the air cleaner cover.
3. Disconnect the EVAP system vent hose from the air cleaner cover.
4. Remove the air cleaner cover.




5. Remove the 3 bolts (1) retaining the air cleaner lower assembly.
6. Remove the air cleaner lower assembly (2) from the vehicle.

INSTALLATION PROCEDURE




1. Install the air cleaner lower assembly (2) to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Secure the air cleaner lower assembly with the 3 bolts (1).

Tighten
Tighten the bolts to 10 N.m (89 lb in).

3. Install the air cleaner cover.




4. Secure the air cleaner cover with the retaining clips (2).
5. Connect the EVAP system vent hose to the air cleaner cover.
6. Connect the air inlet duct (1) to the air cleaner assembly.