Cruise Control Switch Replacement

REMOVAL PROCEDURE




1. Remove the following components from the instrument panel:
1.1. The 3 screws (2)
1.2. The IP steering column opening trim plate (1)




2. Release the upper and lower retaining tabs behind the instrument panel which secure the cruise control switch (6).
3. Slide the cruise control switch (6) from the instrument panel in order to disconnect the electrical connector.
4. Disconnect the cruise control switch electrical connector.
5. Remove the cruise control switch (6) from the vehicle.

INSTALLATION PROCEDURE




1. Connect the cruise control switch electrical connector.
2. Install the cruise control switch (6) to Instrument panel. Ensure that the retaining tabs are fully engaged.




3. Install the IP steering column opening trim plate (1) to the instrument panel. Secure the trim plate with the 3 screws (2).