Fastener Tightening Specifications

Backup Lamp Switch 20 Nm (15 ft. lbs.)
Clutch Housing Bolts 45 Nm (33 ft. lbs.)
Countershaft Center Bearing Plate Bolts 10 Nm (89 inch lbs.)
Gearshift Lever Case Bolts 17 Nm (13 ft. lbs.)
Input Shaft Bearing Retainer Bolts 23 Nm (17 ft. lbs.)
Lever Locating Bolts 20 Nm (15 ft. lbs.)
Locating Spring Bolts 28 Nm (21 ft. lbs.)
Rear Case Bolts 23 Nm (17 ft. lbs.)
Reverse Gearshift Limit Bolt 35 Nm (26 ft. lbs.)
Reverse Idler Shaft Bolt 22 Nm (16 ft. lbs.)
Select Return Spring Bolts 23 Nm (17 ft. lbs.)
Transfer Case-to-Transmission Bolts 28 Nm (21 ft. lbs.)
Upper-to-Lower Case Retaining Bolts 23 Nm (17 ft. lbs.)