HVAC Control Assembly Replacement - Front Auxiliary

REMOVAL PROCEDURE




1. Remove the console roof screw.
2. Support the console (1) and remove it from the headliner.
3. Disconnect the electrical connectors (3).
4. Remove the console (1) from the vehicle.
5. Remove the HVAC control assembly (2) from the console (1) by depressing the 4 tabs on the backside of the controller.

INSTALLATION PROCEDURE




1. Install the HVAC control assembly (2) to the console (1).
2. Connect the electrical connectors (3).
3. Install the console (1) to the headliner.
4. Install the console roof screw.
5. Calibrate the HVAC module actuators. Refer to Re-Calibrating Actuators.