Programmable Automatic Door Locks

The automatic door lock option is factory programmed to have no doors lock or unlock. The automatic door lock feature can be programmed to control the door lock system based on the following inputs:
^ Ignition 1 input is active.
^ All door jamb switch inputs are inactive.
^ Cargo door or lift gate/lift glass ajar inputs are inactive.
^ Vehicle speed is greater than 24 km/h (15 mph) for 2 seconds.
^ Key-in-ignition

An automatic door lock function will only occur once per ignition cycle unless, any door jamb switch input changes state to active and back to inactive. Then the automatic door lock feature will lock all doors again.

Once the automatic door lock feature has locked the doors, the automatic door lock feature will then unlock all the doors once the ignition key is removed from the ignition.

For detailed instructions on programming the automatic door locks, refer to Vehicle Personalization in Personalization.