Mirror Face Replacement

REMOVAL PROCEDURE

CAUTION: When working with any type of glass, wear approved safety glasses and gloves in order to reduce the chance of personal injury.




1. Starting from the side away from the vehicle insert your fingers as far as possible behind the mirror back toward the center of the back.
2. Pull the mirror face out of the housing.
3. Disconnect the 2 electrical connectors, if equipped with a heated feature.
4. Remove the mirror face from the mirror housing.
5. Inspect the adjuster mechanism for damage.

INSTALLATION PROCEDURE




1. Inspect the components for any damage. Ensure that the mirror back and the glass sub-assembly have all the snap-fit hooks in place.
2. It the mirror has the heated feature, plug in the 2 electrical connectors to the back of the mirror.
3. Align the mirror back snap-fit hooks with the adjuster mechanism.




4. Gently press the mirror back into the adjuster mechanism with the palm of the hand on the center of the glass until it locks into place.
5. Inspect the operation of the mirror.