Keyless Entry Transmitter Battery: Service and Repair
TRANSMITTER BATTERY REPLACEMENTREMOVAL PROCEDURE
1. Insert a small coin between the 2 halves of the transmitter case at the slot provided near the key ring hole.
2. Twist the coin in order to open the case.
3. Open the transmitter case.
NOTE: Refer to Handling ESD Sensitive Pans Notice in Service Precautions.
4. Remove the battery (2).
INSTALLATION PROCEDURE
1. Install the battery (2) with the positive (+) side down.
Use one 3 V CR2032 battery, or the equivalent.
2. Ensure that the seal is in position. Align the 2 halves of the case and snap the 2 halves together.
3. Resynchronize the transmitter. Refer to Transmitter Synchronization. Transmitter Synchronization
4. Replace the batteries when the range of the transmitter decreases to less than 7 m (23 ft).