Operation CHARM: Car repair manuals for everyone.

Remote CD Player Replacement

REMOVAL PROCEDURE

IMPORTANT: Do not grab or pull on the CD storage door when removing the trim bezel.




1. Remove the screws securing the trim bezel to the console extension.
2. Protect the console extension from damage then carefully use a small prying device to push in the tabs underneath the trim bezel securing the top of the trim bezel.
3. Remove the trim bezel.




4. Use a small screwdriver in order to release the CD player retainers.
5. Slide the CD player out.
6. Disconnect the electrical connector.

INSTALLATION PROCEDURE




1. Connect the electrical connector.
2. Install the CD player.
3. When the CD player is fully seated, snap the unit into the retainers.

NOTE: Refer to Fastener Notice in Service Precautions.




4. Install the trim bezel and the screws.

Tighten
Tighten the screws to 2 N.m (18 lb in).

5. Verify the component operation.