Jack and Tool Stowage Replacement (Suburban/Yukon XL)

Jack and Tool Stowage Replacement (Suburban/Yukon XL)

Removal Procedure




1. Remove the storage tray located in left rear of vehicle.
2. Remove the wing nut retaining the tool kit bracket.
3. Turn the adjusting knob on jack assembly counter-clockwise.
4. Remove the jack.

Installation Procedure




1. Install the jack to vehicle.
2. Turn the adjusting knob on jack assembly clockwise until tight.
3. Install the wing nut retaining the tool kit bracket.
4. Install the storage tray to left rear of vehicle.