Compressor Clutch Coil Install (Denso)

1. Install the coil assembly to the compressor.
2. Install the coil snap ring.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the coil connector retaining bracket screw.

Tighten
Tighten the screw to 9 N.m (80 lb in).

4. Install the clutch hub/bearing assembly.
5. Install the clutch hub/bearing snap ring.
6. Install the clutch plate assembly.
7. Install the clutch plate retaining bolt (1).

Tighten
Tighten the bolt to 18 N.m (13 lb ft).