21. Crankshaft Rear Oil Seal Removal

Crankshaft Rear Oil Seal Removal

- Tools Required
- J 43320 Crankshaft Rear Seal Puller





1. Install the J 43320 guide pins into the crankshaft.





2. Install the J 43320 over the guide pins.
3. Using a suitable drill, insert eight of the self-drilling sheet metal screws into the rear crankshaft seal, using a crisscross pattern. The self-drilling screws are included with the J 43320.





4. Thread the center bolt of J 43320 into the crankshaft to remove the seal.
5. Remove the J 43320 guide pins from the crankshaft.