With Automatic Transmission

Engine Flywheel Installation (C/K/G/C350OHD with AT)

Important: Make sure the flywheel is installed correctly. Engine Side is stamped on the flywheel to assist with installation.





1. Install the engine flywheel.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the engine flywheel bolts.
2.1. Tighten the engine flywheel bolts to 40 Nm (30 ft. lbs.) for the first pass.
2.2. Tighten the engine flywheel bolts to 80 Nm (59 ft. lbs.) for the second pass.
2.3. Tighten the engine flywheel bolts to 100 Nm (74 ft. lbs.) for the final pass.