AIR Cleaner Assembly Replacement
AIR CLEANER ASSEMBLY REPLACEMENTREMOVAL PROCEDURE
1. Remove the air cleaner intake duct (4).
2. Disconnect the mass airflow/intake air temperature (MAF/IAT) sensor electrical connector (2).
3. Grasp the air filter assembly (1) and pull the assembly retaining pins (2) away from the retaining grommets (3) and remove the assembly.
INSTALLATION PROCEDURE
1. Line up the retaining pins (2) with the grommets in the mounting bracket (3).
2. Install the air cleaner assembly until the air cleaner is seated fully on the mounts and is up against the fender apron.
3. Install the air cleaner intake duct.
4. Reconnect the MAF/IAT sensor electrical connector (2).