Driver Seat Back Cushion Heater and Passenger Seat Back Cushion Heater Replacement

Driver Seat Back Cushion Heater and Passenger Seat Back Cushion Heater Replacement

Removal Procedure

For the Escalade model, the seat back heater is sewn into the seat back cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement in order to replace the seat back cover. For all other models, refer to the procedure below.

1. Remove the seat from the vehicle.
2. Remove the seat back trim cover.




3. Peel the seat back heater off the foam pad.
4. Disconnect the seat back heater harness.

Installation Procedure




1. Connect the seat back heater harness.
2. Install the seat back heater.
3. Install the seat back trim cover.
4. Install the seat in the vehicle.