60. Engine Coolant Air Bleed Pipe Clean and Inspect - Four Point Pipe

Important: Do not reuse the engine coolant air bleed pipe gaskets. Upon installation of the engine coolant air bleed pipe, install NEW gaskets.





1. Remove the sealing gaskets from the pipe.





2. Clean the pipe (1) and hose (2) in solvent.

Caution: Wear safety glasses in order to avoid eye damage.

3. Dry the pipe and hose with compressed air.
4. Inspect the pipe for damage or restrictions.
5. Inspect the gasket and hose sealing surfaces for damage.
6. Inspect the hose (2) for restrictions, cracking or wear. The hose may be reused if not damaged.