Steering Wheel

- Tools Required
- J 1859-A Steering Wheel Puller

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.





1. Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in Restraint Systems.
2. Mark the relationship of the steering wheel (1) to the column.
3. Remove the steering wheel and the nut (2).





4. Use the J 1859-A in order to remove the steering wheel from the column.


Installation Procedure





1. With the marked relationship references in line, install the steering wheel (1) onto the column.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the steering wheel nut (2).
- Tighten the steering wheel nut to 41 Nm (30 ft. lbs.).
3. Install the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in Restraint Systems.