8. Transmission Intermediate Case Disassemble

Transmission Intermediate Case Disassemble

^ Tools Required
- J 44736 Bridge and Forcing Screw
- J 44737 Shift Rail Bearing Remover

Important: Only remove the bearing races if replacing the bearing race or if the mating bearings are being replaced. The bearing race and the mating bearings must be replaced together. Do not reuse the bearing race after removal.

1. Inspect the bearings for damage or wear.





2. Using a brass drift and hammer remove the main shaft intermediate bearing race from the intermediate case.
3. Using a brass drift and hammer remove the countershaft intermediate bearing race from the intermediate case

Important: Only remove the bearings if replacing the bearing. Do not reuse the bearings after removal.

4. Inspect the bearings for damage or wear.





5. Remove the shift rail bearing from the intermediate case using the J 44736 (1) and the J 44737 (2). Expand the J 44737 (2) to fit securely in the bearing.