Transfer Case - NVG 263-NP1 (Selectable)

Transfer Case Speed Sensor Replacement
Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transfer case speed sensor electrical connector.




3. Remove the transfer case speed sensor.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.




1. Install the transfer case speed sensor.
^ Tighten the transfer case speed sensor to 15 Nm (11 ft. lbs.).





2. Install the transfer case speed sensor electrical connector.
3. Lower the vehicle. Refer to Vehicle Lifting.