Air Bag Deactivation Switch: Service and Repair

INFLATABLE RESTRAINT INSTRUMENT PANEL (IP) MODULE DISABLE SWITCH REPLACEMENT

REMOVAL PROCEDURE

CAUTION: Refer to SIR Caution in Service Precautions.




1. Disable the SIR system.
2. Remove Trim Plate- IP Accessory Panel Trim Plate Replacement - IP Accessory.
3. Release the 4 locking tabs (1) on the Passenger AIR BAG Disable Switch.




4. Remove the switch from the instrument panel.
5. Disconnect the electrical connections, as needed.

INSTALLATION PROCEDURE




1. Connect the electrical connections, as needed.
2. Install the switch to the instrument panel by firmly pressing the switch into place.
3. Enable the SIR system.