(Front)

Transfer Case Speed Sensor
Replacement (Front)

Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.





2. Remove the transfer case shield.
3. Remove the transfer case front speed sensor electrical connector.





4. Remove the transfer case front speed sensor.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the transfer case front speed sensor.
Tighten the transfer case front speed sensor to 15 Nm (11 ft. lbs.).





2. Install the transfer case front speed sensor electrical connector.
3. Install the transfer case shield.
4. Lower the vehicle. Refer to Vehicle Lifting.