(Right Rear)

Transfer Case Speed Sensor Replacement
(Right Rear)

Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.





2. Remove the transfer case shield.
3. Remove the transfer case right rear speed sensor electrical connector.
4. Remove the transfer case speed sensor.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the transfer case right rear speed sensor.
Tighten the transfer case right rear speed sensor to 15 Nm (11 ft. lbs.).
2. Install the transfer case right rear speed sensor electrical connector.
3. Install the transfer case shield.
4. Lower the vehicle. Refer to Vehicle Lifting.