B1061

SIR Schematics:

Inflatable Restraint IP Module:

Inflatable Restraint Sensing And Diagnostic Module:

Inflatable Restraint Steering Wheel Module Coil:

CIRCUIT DESCRIPTION
When the ignition switch is turned to the ON position battery voltage is applied to the AIR BAG indicator and to the ignition 1 voltage input at the inflatable restraint Sensing and Diagnostic Module (SDM). The SDM responds by flashing the AIR BAG indicator seven times.

CONDITIONS FOR RUNNING THE DTC
Ignition 1 voltage is within the normal operating voltage range.

CONDITIONS FOR SETTING THE DTC
The voltage at the AIR BAG indicator output does not match the commanded state of the lamp driver for 500 milliseconds.

ACTION TAKEN WHEN THE DTC SETS
The SDM attempts to command the AIR BAG indicator ON.

CONDITIONS FOR CLEARING THE DTC
^ The condition responsible for setting the DTC no longer exists and the scan tool Clear DTCs function is used.
^ A history DTC will clear once 250 malfunction free ignition cycles have occurred.

DIAGNOSTIC AIDS
Refer to Air Bag Indicator Always On and Air Bag Indicator Does Not Come ON in order to diagnose warning indicator circuit malfunctions.

Symptom Related Diagnostic Procedures

TEST DESCRIPTION




The number(s) below refer to the step number(s) on the diagnostic table.
2. This test determines if the malfunction is internal to the SDM.