14. Engine Front Cover Removal
Engine Front Cover Removal1. Drain the engine oil.
2. Remove the throttle body and intake manifold.
3. Remove the left and right cylinder head covers.
4. Remove the water pump pulley.
5. Remove the water pump drive belt.
6. Remove the 3 bolts and the thermostat cap.
7. Remove the 3 bolts from the power steering pump bracket and remove bracket.
8. Remove the crankshaft balancer.
9. Remove the lower oil pan.
10. Remove the upper oil pan.
11. Disconnect the Crankshaft Position (CKP) sensor connector.
12. Remove the bolt and the Crankshaft Position (CKP) sensor.
13. Remove the bolts and the front cover (1).