96. Engine Lift Bracket Installation

Engine Lift Bracket Installation

1. Install the left accessory/lift bracket.

Notice: Refer to Fastener Notice in Service Precautions.





2. Install the left accessory/lift bracket retaining bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Install the left accessory/lift bracket retaining nut (if equipped).
Tighten the nut to 50 Nm (37 ft. lbs.).
4. Install the vacuum pump.





5. Install the vacuum pump retaining bolts.
Tighten the bolts to 25 Nm (19 ft. lbs.).
6. Install the drive belt tensioner.





7. Install the drive belt tensioner retaining bolt.
Tighten the bolts to 83 Nm (61 ft. lbs.).