Side Bearings Replacement

Differential Side Bearings Replacement
Removal Procedure

- Tools Required
- J 8107-2 Side Bearing Puller Plug
- J 29721 Differential Side Bearing Remover
- J 29721-70 Side Bearing Adapters





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the axle shafts.
3. Remove rear axle housing cover.
4. Remove the differential case assembly.

Important: Mark the side bearings, the outboard shims, and the bearing cups appropriately and place with the corresponding bearing cap.

5. Remove the differential side bearings using the J 8107-2, the J 29721 and the J 29721-70.

Important: Mark the inboard and the outboard shims left or right.

6. Remove the inboard shims.

Installation Procedure
1. Determine the total shim pack size for the differential assembly.
2. Install the axle shafts.
3. Install the rear axle housing cover.
4. Fill the axle with lubricant. Use the proper fluid.
5. Lower the vehicle.