Security Lamp/Indicator: Description and Operation

SECURITY Indicator Operation
The theft deterrent control module can command the instrument cluster to illuminate the SECURITY indicator only when the ignition key is in the ON position. If the PCM loses communication with the theft deterrent control module, the instrument cluster will also detect the loss of communication and will illuminate the SECURITY indicator. The SECURITY indicator can indicate both malfunctions, Indicator on steady and tamper, Indicator flashing. A flashing indicator indicates unauthorized operation. Under the following conditions the SECURITY indicator may be commanded to illuminate.

SECURITY Indicator Illuminates when Engine is Running
If the theft deterrent control module is unable to measure the ignition key transponder value or the PCM loses communication with the theft deterrent control module while the engine is running, the indicator will be illuminated.

SECURITY Indicator Illuminated and Engine Does Not Start
If the theft deterrent control module was unable to measure the ignition key transponder value or the PCM has detected a problem with the theft deterrent system. The VTD system is in Learn Mode. Refer to Programming Theft Deterrent System Components.

SECURITY Indicator Flashes and Engine Does Not Start
The theft deterrent control module has measured an incorrect transponder value, the calculation to the challenge is incorrect or the PCM has lost communication with the theft deterrent control module, The VTD system considers this a tamper condition. The VTD indicator will flash.