Daytime Running Lamp: Service and Repair

DAYTIME RUNNING AND FOG LAMP ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the electrical harness connectors.
3. Remove the bulbs from the daytime running and fog lamp assembly by turning the bulb 1/4 turn counterclockwise.

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.




4. Remove the fasteners retaining the lamp assembly to the fascia.
5. Remove the lamp assembly from the vehicle.

INSTALLATION PROCEDURE




1. Install the lamp assembly to the vehicle.
2. Install the fasteners to the lamp assembly.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the fasteners to 1.1 N.m (10 lb in).

3. Install the bulbs to the daytime running and fog lamp assembly by turning the bulb 1/4 turn clockwise.
4. Connect the electrical harness connectors.
5. Lower the vehicle.
6. Re-aim the fog lamps.