Parking Lamp: Service and Repair

PARK/TURN SIGNAL LAMP REPLACEMENT

REMOVAL PROCEDURE




1. Open the hood.
2. Rotate the park/turn retainer pins.




3. Remove the park/turn retainer pins.
4. Pull out the park/turn assembly in order to access the electrical connector.
5. Disconnect the electrical connector.




6. Remove the bulb from the park/turn assembly by twisting the bulb counterclockwise.

INSTALLATION PROCEDURE




1. Install the new bulb to the park/turn assembly by twisting the bulb clockwise in order to lock in place.
2. Connect the electrical connector to the bulb.
3. Install the park/turn assembly.




4. Install the park/turn retainer pins.




5. Rotate and lock the pins in place.
6. Inspect the operation.