Parking Brake Warning Switch: Service and Repair

Park Brake Warning Lamp Switch Replacement

Removal Procedure


Caution: Refer to Battery Disconnect Caution in Cautions and Notices.






1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
2. Remove the MID-bussed electrical center from the bracket.
3. Remove the park brake warning lamp switch electrical connector.






4. Remove the park brake warning lamp switch mounting bolt.
5. Remove the park brake warning lamp switch.

Installation Procedure

1. Install the park brake warning lamp switch.

Note: Refer to Fastener Notice in Cautions and Notices.

2. Install the park brake warning lamp switch mounting bolt.
- Tighten the bolt to 3 N.m (25 lb in).






3. Connect the park brake warning lamp switch electrical connector.
4. Install the MID-bussed electrical center to the bracket.
5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.