Seat Riser Latch Assembly Replacement - Rear No. 2 (Bench Rear Latch)

Seat Riser Latch Assembly Replacement - Rear No. 2 (Bench Rear Latch)

Removal Procedure




1. Disengage the J-Clips on the back of the seat cushion frame in order to gain access to the bolts.
2. Remove the bolts (1) from the rear seat riser assembly (2).
3. Disconnect the cable (3) from the riser assembly.
4. Remove the riser assembly from the seat frame.

Installation Procedure




1. Install the riser assembly to the seat frame.
2. Connect the cable (3) to the riser assembly.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolts (1) that retain the rear riser assembly (2) to the cushion frame.

Tighten the bolts to 53 N.m (39 lb ft).

4. Engage the J-Clips on the back of the seat cushion frame.