Hinge Replacement - Tethered - Cargo Storage
HINGE REPLACEMENT - TETHERED - CARGO STORAGEREMOVAL PROCEDURE
1. Remove the stowage compartment lid from the vehicle.
2. Remove the retainers (1) from the lower hinge.
3. Remove the screws (1) from the upper hinge.
4. Remove the hinge from the stowage compartment assembly.
INSTALLATION PROCEDURE
1. Place the lower hinge studs (1) into the stowage compartment (2).
2. Install the lower hinge retainers (1).
IMPORTANT: If equipped with a gasket, ensure the gasket alignment surrounds the retainers to prevent water intrusion.
3. Align the upper hinge with the stowage compartment lid and install the screws (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 7 N.m (62 lb in).
4. Reinstall the stowage compartment onto the vehicle.