Stabilitrak

Antilock Brake System

Traction Control Switch Replacement (Stabilitrak)

Removal Procedure

1. Remove the instrument panel (I/P) bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.






2. Gently lift the retaining tabs (2) and remove the Stabilitrak switch (3) from the I/P assembly (1).






3. Disconnect the harness connector from the Stabilitrak switch.

Installation Procedure

1. Connect the harness connector to the Stabilitrak switch.






2. Install the Stabilitrak switch (3) into the I/P assembly (1)
3. Ensure that the switch is secure into both retaining tabs (2).
4. Install the I/P bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.