49. C1 Clutch Friction Plate Inspection

C1 Clutch Friction Plate Inspection





Important:
^ Measure as described below at a minimum of 3 locations.
^ Replace any C1 clutch friction plate that does not meet specifications.

1. Measure the thickness of each C1 clutch friction plate (1) at dimension A.
C1 Clutch Friction Plate Thickness
Minimum thickness is 2.375 mm (0.093 inch).
2. Measure the oil groove depth of each plate at dimension B.
Oil Groove Depth
Minimum groove depth is 0.200 mm (0.0079 inch).

Important: Check the plates for coning on a level surface.

3. Measure the cone of each plate (1) at dimension A.

Friction Plate Cone
Maximum cone is 0.255 mm (0.010 inch).