Camshaft Position Sensor: Service and Repair
Camshaft Position SensorREMOVAL PROCEDURE
1. Remove the cooling fan pulley (2).
2. Disconnect the camshaft position (CMP) sensor electrical connector (1).
3. Remove the CMP sensor bolt.
4. Remove the CMP sensor.
INSTALLATION PROCEDURE
1. Install the CMP sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the CMP sensor bolt.
Tighten
Tighten the bolt to 8 N.m (71 lb in).
3. Install the cooling fan pulley (2).
4. Connect the CMP sensor electrical connector (1).