Flex Plate: Service and Repair

Engine Flywheel Replacement

Removal Procedure





1. If equipped with a automatic transmission remove the transmission. Refer to Transmission Replacement.





2. Remove the engine flywheel bolts.
3. Remove the engine flywheel.
4. If equipped with a manual transmission remove the clutch assembly.
5. Remove the engine flywheel bolts.
6. Remove the engine flywheel
7. Clean and inspect the engine flywheel.

Installation Procedure





Important: Make sure the flywheel is installed correctly. "Engine Side" is stamped on the flywheel to aid with installation.

1. If equipped with a manual transmission. Install the engine flywheel.





2. If equipped with a automatic transmission, Install the engine flywheel.

Notice: Refer to Fastener Notice in Service and Precautions.

3. Install the engine flywheel bolts.
3.1. Tighten the bolts a first pass to 40 Nm (30 lb ft).
3.2. Tighten the bolts a second pass to 80 Nm (59 lb ft).
3.3. Tighten the bolts a final pass to 100 Nm (74 lb ft).
4. If equipped with a manual transmission, install the clutch assembly.
5. If equipped with a automatic transmission, install the transmission. Refer to Transmission Replacement.