Power Window Motor: Service and Repair

MOTOR REPLACEMENT - POWER WINDOW

REMOVAL PROCEDURE
1. Remove the front door trim panel.
2. Remove the front door water deflector.




3. Remove the electrical connector from the power window motor (2).
4. Remove the nuts (3) that retain the power window motor (2) to the front door module (1).
5. Remove the power window motor (2) from the vehicle.

INSTALLATION PROCEDURE




1. Install the power window motor (2) to the vehicle.
2. Install the nuts (3) in order to retain the power window motor (2) to the front door module (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the retaining nuts to 11 N.m (97 lb in).

3. Install the electrical connector to the power window motor (2).
4. Install the front door water deflector.
Install the front door trim panel.