Push Rod

Install the rocker arms as follows:
* Finger start the bolt at location (1)
* Finger start the bolt at location (2)
* Finger start the bolt at location (3)
* Finger start the remaining rocker arm bolts







Rotate the crankshaft balancer to position the crankshaft balancer alignment mark (1) 57-63 degrees clockwise or counterclockwise from the engine front cover alignment tab (2).

Important: Once the rocker arms are installed and properly torqued, no additional valve lash adjustment is required.

Tighten the rocker arm bolts to 30 Nm (22 ft. lbs.)