Service Procedure

To correct the condition of missing urethane adhesive, the windshield MUST BE REMOVED AND REINSTALLED. DO NOT attempt to replace the missing urethane without removing the windshield.

1. Remove and reinstall the windshield according to the service procedure listed in your Service Manual or in SI.

2. Install the GM Recall Identification Label.

Recall Identification Label

FOR US AND IPC

Place a Recall Identification Label on each vehicle corrected in accordance with the instructions outlined in this Product Recall Bulletin. Each label provides a space to include the recall number and the five (5) digit dealer code of the dealer performing the service. This information may be inserted with a typewriter or a ball point pen.

Put the Recall Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle. When installing the Recall Identification Label be sure to pull the tab to allow the adhesion of the clear protective covering.

Recall Identification Label

FOR CANADA

Place a Recall Identification Label on each vehicle in accordance with the instructions outlined in this Product Recall Bulletin. Each label provides a space to include the recall number and the five (5) digit dealer code of the dealer performing the recall service. This information may be inserted with a typewriter or a ball point pen.

Put the Recall Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle.