Transfer Case Input Shaft Seal Replacement

Transfer Case Input Shaft Seal Replacement

Tools Required
^ J42738 Front Output Shaft Seal Installer

Removal Procedure
1. Remove the transfer case.





2. Remove the input shaft seal, using a flat-tipped screwdriver.

Installation Procedure

Important: When installing the input shaft seal, make sure that the part numbers on the seal are facing outward (toward the technician). The input shaft seal should be even with the surface of the transfer case after installation.





1. Position the seal on the input shaft.
2. Using the J42738, install the input shaft seal.
3. Install the transfer case.