Operation CHARM: Car repair manuals for everyone.

Fuel Pressure Gage Installation and Removal

FUEL PRESSURE GAGE INSTALLATION AND REMOVAL


TOOLS REQUIRED
J 34730-1A Fuel Pressure Gage

CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
Gasoline/Gasoline Vapors
Refer to Fuel Gage Leak Caution in Service Precautions.

Fuel Gage Leak Caution








INSTALLATION PROCEDURE
1. Remove the engine sight shield.
2. Remove the fuel rail pressure fitting cap.
3. Connect the J 34730-1A to the fuel pressure valve. Wrap a shop towel around the fitting while connecting the gage in order to avoid spillage.
4. Install the bleed hose on J 34730-1A into an approved container.







REMOVAL PROCEDURE
1. Remove the bleed hose on the J 34730-1A from the approved container.
2. Remove the shop towel from around the fitting and discard into an approved container.
3. Disconnect the J 34730-1A from the fuel pressure valve.
4. Install the fuel rail pressure fitting cap.
5. Install the engine sight shield.