Shift Lever - Without Tow/Haul Switch

SHIFT LEVER REPLACEMENT (WITHOUT TOW/HAUL SWITCH)

REMOVAL PROCEDURE




1. Roll back the seal until the TORX(R) head screw (2) is exposed.
2. Remove the TORX(R) head screw (2).
3. Remove the shift lever (1).

INSTALLATION PROCEDURE




1. Install the shift lever (1).
2. Install the TORX(R) head screw (2).

NOTE: Refer to Fastener Notice in Service Precautions.


Tighten
Tighten the screw to 1.5 N.m (13 lb in).

3. Roll the seal over the TORX(R) head screw (2).